FM1_AudioBase

Firmware installer for the M-VAVE FM-1

FM1_AudioBase makes the FM-1 a USB audio interface named FM-1: what the computer plays comes out of the FM-1, MASTER sets its volume, and the same sound goes back to the computer as a USB audio input. GLO shows a visualizer of it.

At your own risk

Installing custom firmware is at your own risk.

FM1_AudioBase is unofficial firmware, provided as is, without any warranty. It is not made, endorsed or supported by M-VAVE. A failed or interrupted install can leave the FM-1 unable to start until it is recovered with a USB tool. You can return to the official firmware at any time (below).

Before you install

Firmware

Detailed log

        

If something goes wrong

The write stopped: reconnect the FM-1 and press Install again. It stays in update mode until the write is finished.

The firmware does not start: after two failed boots in a row the FM-1 opens USB RESCUE by itself (or switch it on holding OCT−). The installer works there too.

If power is lost mid-write, the FM-1 may stay dark with no USB device: charge it before installing.

Recovering an FM-1 that does not start: MvaveFM1Unbricker

Back to the official firmware

Writes M-VAVE's FM-1 V15 the same way. Only the unmodified official file is accepted: its SHA-256 is checked before writing, and the file never leaves your browser.

Download FM-1 V15 (Downloads → PC Firmware): m-vave.com/download

Licences

FM1_AudioBase is free software under the GNU General Public License v3.0 only, provided without any warranty. Complete source code of this version.

Details: LICENSING.md · checksums: SHA256SUMS